galvanized rectangular pipe

Outer Diameter:  Square pipe: 20*20mm~400*400mm

                            Rectangular pipe: 20*40mm~300*500mm

Wall Thickness:  Round pipe: 0.95~17.75mm

                          Square and rectangular pipe: 1.7~16mm

Length:  3-12M according to client requirement

Standard:  Hollow section: ASTM A500, EN10219, EN10210, JIS3466, GB/T 6728

Material:  Gr.A, Gr.B, Gr.C,S235, S275, S355,A36, SS400,Q195, Q235, Q345

Certificate:  ISO 9001:2008,SGS, BV, CCIC etc

Finish of pipe:  Hot dipped galvanized with zinc 220~260g/m2

                        Pre-Galvanized with zinc 30~150g/m2

                        Painted with black/varnish lacquer

                        Oil on the surface to prevent rust

                        Bare pipe without painting

Pipe End:  Plain end/ Bevel end;Groove end;Joint with flange;Threaded on two ends, one end with coupling, one end with plastic cap

Marking:  As per client requirement or mill standard  Painting method: Spray white paint

Packing:  OD not less than 273mm: Loose packing,piece by piece.OD less than 273mm: In hexagonal seaworthy bundles packed by steel strips.small sizes nested into big sizes.

Techinical:  ERW (high - frequency welded)

Trade Term:  FOB, CFR, CIF, EXW, FCA

Payment Term:  T/T, LC

Delivery Time:  15-45 days (based on quantity) after receiving advanced payment by T/T or LC

Main Market:  Southeast Asia, South Asia, Middle East, Europe,
Middle&South America, Africa and Oceania